Showing all 4 results
The Interlock 5R device ensures the compliance with Radio Contest rules for the participation in Multi-Operator categories:
- Multi/Single: Only one transmitted signal on one band permitted.
- Multi/2: Maximum of two transmitted signals on two different bands may be used at any time.
- InBand: Only one signal allowed between a Radio and its associated InBand.
The Interlock supports 5 Radios (R1, R2, R3, R4 & R5) and it can be configured as M/S or M/2 so the unit will monitor that only one (M/S) or two (M/2) signals are on Air.
In case of rules violation, the unit will activate an Inhibit signal that will be used by the Radio (Yaesu/Elecraft) to STOP the transmision of the signal to the antenna.
Interlock – cables
Optional Interlock cables to be used with Yaesu or K3 (3m)
Interlock – AuxBox
Optional Interconection box for transceivers without Inhibit signal
Antenna Switch 2×2
The AS2x2 is a 2 Input Ports into 2 Outputs Ports, usefull for a contest station where you have a Main Radio (RUN) and a Multiplier Station (Inband) at the same band. In this way, the RUN station uses the main antenna(s) while the Inband station is looking for new multipliers or QSOs and uses an RX antenna located far from the main antenna. As soon as the Inband station passes to TX, the switch AS2x2 inverts the antennas, passing the Inband station to use the Main antenna while the RUN does not run out of antenna put to use the antenna of RX.
The AS2x2 can be connected between the RUN Radio and the Linear Amplifier (in case a Amplifier is used) and between the Inband Radio and the RX antenna. As soon as the Inband Radio activates the PTT the AS2x2 will exchange the outputs, so the Inband will use the Linear Amplifier and the RX antenna will be assigned into the RUN Radio.
The AS2x2 can be used combined with the Interlock 5R so in this case, the Interlock 5R will control automatically the antenna switching.