antenna

Showing all 19 results

View Less
Filters:
  • RemoteBox

    Universal Antenna controller that can be connected with most antenna switchs for remote or automatic control. Example of Antenna Switchs supported:

    • SixPack (2×6)
    • SJ2W (1×6 and 2×6)
    • microHAM (Six Switch, Switch Double Six, ..)
    • RemoteQTH (1x6, 2x6),
    • DX Engineering (DXE-RR8B-HP, DXE-RR8B-SD, DXE-RR2X8B )
    • Ameritron RCS-10

    In this way, the RemoteBox can control those antenna switchs by replacing the original controller. Also a windows program: RBM is included for local or remote control. Since Oct/2016 a special release that supports 4 square verticals is also available.

    Rated 4.00 out of 5
    130,00170,00 VAT not included
    Clear
    Select options
  • Cable ARS-USB

    Optional cables for use with Yaesu controllers

    Yaesu MiniDIN: Yaesu controllers DXA, SDA Series with minIDIN connector

    Yaesu DIN8: Yaesu Azimuth & Elevation controllers with DIN 8 connector

    Emotator DIN8: Emotator Azimuth & Elevation controllers with DIN 8 connector

    15,00 VAT not included
    Clear
    Select options
  • AS2x2

    ANTENNA SWITCH 2x2

    The antenna Switch AS2x2 is a 2 Input Ports into 2 Outputs Ports, usefull for a contest station where you have a Main Radio (RUN) and a Multiplier Station (Inband) at the same band. In this way, the RUN station uses the main antenna(s) while the Inband station is looking for new multipliers or QSOs and uses an RX antenna located far from the main antenna. As soon as the Inband station passes to TX, the switch AS2x2 inverts the antennas, passing the Inband station to use the Main antenna while the RUN does not run out of antenna put to use the antenna of RX.

    The AS2x2 can be connected between the RUN Radio and the Linear Amplifier (in case a Amplifier is used) and between the Inband Radio and the RX antenna. As soon as the Inband Radio activates the PTT the AS2x2 will exchange the outputs, so the Inband will use the Linear Amplifier and the RX antenna will be assigned into the RUN Radio.

    The AS2x2 can be used combined with the Interlock 5R so in this case, the Interlock 5R will control automatically the antenna switching.

     

     

     

    60,00 VAT not included Add to cart
  • TRX-FEL

    The TRX-FEL (Transceiver Front End Limiter) is a RF protector and limiter for your radio transceiver. Installed between the antenna or amplifier and the transceiver, it requires to be connected the PTT signal from the radio. By default (reception) it will limited any RF signal and will avoid to damage the receiver in the proximity to other transmitters. When the PTT is activated by the radio, the Front End Limiter will be by-passed.

    This model is highly recommended in multi operator contesting, SO2R or Field Day. 

    Specifications in RX (FrontEnd activated)

    • Insertion lost better than 0.4dB in HF (1.8Mhz - 50Mhz) 
    • VSWR < 1.06:1 Range 1.8-29Mhz

    Specifications in TX or ByPass (FrontEnd disabled)

    • Insertion lost better than 0.04dB in HF (1.8Mhz - 50Mhz) 
    • VSWR < 1.05:1 Range 1.8-29Mhz
    • Max power 150W
    47,00 VAT not included Add to cart
  • RX-FEL

    The RX-FEL is a RF protector and limiter for your radio receiver or SDR. Installed between the RX antenna and the receiver, it will limited any RF signal and will avoid to damage the receiver because strong signals.

    The RX-FEL is a device that will protect the receiver front end from high level signals when operating in the proximity to other transmitters which could damage it. Situations such as multi op contesting, SO2R or Field Day. 

    • Insertion lost better than 0.4dB in HF (1.8Mhz - 50Mhz) 
    • VSWR < 1.06:1 (reception)
    45,00 VAT not included
    Clear
    Select options
  • StackMain Controller

    The StackMain Controller is an universal stackmatch control unit. It can control any typical stackmatch with 3 antennas that use 4 relays as some of the most popular stacks by Array Solution, SJ2W, RemoteQTH, etc In a simple way you can activate any of the 3 antennas connected to the antenna stacks without too complex rotaties. Thanks to a friendly user interface you can see which antenna is activated. Includes 2 memories, so with a simple button (red button) you can recall any of the 2 available memories or save a new setup into any of the memories.  

    140,00 VAT not included Add to cart
  • AS1x6

    ANTENNA SWITCH 1x6

    The AS1x6 Remote Coax Switch lets you remotely switch up to 6 HF antennas so you can replace 6 coax feedlines with a single coax. Eliminate a tangle of troublesome coax and have a simple and near installation with just a single coax feedline!

    The AS1x6 will require a control unit as the RemoteBox (https://ea4tx.com/products-page/remotebox/remotebox/) or similar control units. This AS1x6 is a weatherproof switching box that mounts on your tower or mast and the control unit thats placed at your operating station.

    180,00 VAT not included Add to cart
  • Antenna EndFed EF-40

    The EF-40 is an EndFed antenna for 40m that utilize a fixed “L” network matching network.  

    40,00 VAT not included Add to cart
  • AS2x6

    ANTENNA SWITCH 2x6

    We offer the best remote antenna switches with 2 radio and 6 antennas! We carry antenna switches with robust power ratings that eliminate crosstalk and interference caused by strong signals on other ports. This AS2x6 remote switches use quality components and are weatherproofed to stand up to the elements. Plus, installation is hassle-free, making the remote antenna switches an ideal addition to your amateur radio.

    The AS2x6 Remote Antenna Switch lets you remotely switch up to 6 HF antennas into 2 coax. Eliminate a tangle of troublesome coax and have a simple and near installation with just a single coax feedline!

    The AS2x6 will require a control unit as the RemoteBox 2x6 (https://ea4tx.com/products-page/remotebox/remotebox/) or similar control units. This AS2x6 is a weatherproof switching box that mounts on your tower or mast and the control unit thats placed at your operating station.

    [caption id="attachment_6694" align="aligncenter" width="885"]AS2x2-EA4TX-ISOLATION 2 Ports isolation[/caption]
    300,00 VAT not included Add to cart
  • StackMatch

    StackMatch is designed to Stack, Match and Power Split up to three antennas. It can be used to switch antennas in a stack or for beaming multiple directions.

    Works with any antenna design (monoband or multiband) and it can be used as a traditional antenna switch:

    • ANT-A
    • ANT-B
    • ANT-C

    or stacked combination:

    • ANT-A + ANT-B
    • ANT-A + ANT-C
    • ANT-B + ANT-C
    • ANT-A + ANT-B + ANT-C

    It provides a reasonable SWR with any port combination:

    [caption id="attachment_6693" align="aligncenter" width="886"] 2 Ports activated: AntA + AntB[/caption] [caption id="attachment_6692" align="aligncenter" width="884"]ST1X3-EA4TX-SWR1 1 Port active: AntA[/caption]

    The StackMatch will require a control unit as the StackMain (https://ea4tx.com/product/stackmain/stackmain/) or similar control units.

     

    200,00220,00 VAT not included
    Clear
    Select options
  • VA6AM 10-15-20m Triplexer

    Low power Triplexer (200w) designed by VA6AM for the 10m, 15m and 20m bands.

    It allows to obtain from a TriBand antenna, its 3 independent outputs.

    The equipment is delivered complete and adjusted.

    235,00 Add to cart
  • 160m High power BPF – 4Kw

    This is a High power (4Kw) 160m Band Pass Filter for Big Guns.

    Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.

    All BPF's are hand made

    230,00 VAT not included
    Clear
    Select options
  • 80m High power BPF – 4Kw

    This is a High power (4Kw) 80m Band Pass Filter for Big Guns.

    Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.

    All BPF's are hand made

    230,00 VAT not included
    Clear
    Select options
  • 40m High power BPF – 4Kw

    This is a High power (4Kw) 40m Band Pass Filter for Big Guns.

    Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.

    All BPF's are hand made

    230,00 VAT not included
    Clear
    Select options
  • 10m High power BPF – 4Kw

    This is a High power (4Kw) 10m Band Pass Filter for Big Guns.

    Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.

    All BPF's are hand made

    230,00 VAT not included
    Clear
    Select options
  • 20m High power BPF – 4Kw

    This is a High power (4Kw) 20m Band Pass Filter for Big Guns.

    Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.

    All BPF's are hand made

    230,00 VAT not included
    Clear
    Select options
  • 15m High power BPF – 4Kw

    This is a High power (4Kw) 15m Band Pass Filter for Big Guns.

    Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.

    All BPF's are hand made

    230,00 VAT not included
    Clear
    Select options
  • 6xBFP-FEL

    The FEL is a PCB board where you can assemble the components to build a 6x receiver antenna switch, 6x bandpass filters from 10 to 160m and a limiter to protect the receiver.

    It was designed by Imanol EC2DX, Jose Ramon EA7KW, Juanma EA5RS & Pablo EA4TX and since 2017 we are using this 6xBPF-FEL at out contest stations.

     

    25,00 Add to cart
  • AS2x8

    ANTENNA SWITCH 2x8

    We offer the best remote antenna switches with 8 ports and 2 outputs! We carry antenna switches with robust power ratings that eliminate crosstalk and interference caused by strong signals on other ports. This AS2x8 remote switches use quality components and are weatherproofed to stand up to the elements. Plus, installation is hassle-free, making the remote antenna switches an ideal addition to your amateur radio.

    The AS2x8 Remote Antenna Switch lets you remotely switch up to 8 HF antennas into 2 coax. Eliminate a tangle of troublesome coax and have a simple and near installation with just a single coax feedline!

    The AS2x8 will require a control unit as the RemoteBox 2x8 (https://ea4tx.com/products-page/remotebox/remotebox/) or similar control units. This AS2x8 is a weatherproof switching box that mounts on your tower or mast and the control unit thats placed at your operating station.

    320,00 VAT not included Add to cart