remote

Showing all 11 results

View Less
Filters:
  • RemoteBox

    Universal Antenna controller that can be connected with most antenna switchs for remote or automatic control. Example of Antenna Switchs supported:

    • SixPack (2×6)
    • SJ2W (1×6 and 2×6)
    • microHAM (Six Switch, Switch Double Six, ..)
    • RemoteQTH (1x6, 2x6),
    • DX Engineering (DXE-RR8B-HP, DXE-RR8B-SD, DXE-RR2X8B )
    • Ameritron RCS-10

    In this way, the RemoteBox can control those antenna switchs by replacing the original controller. Also a windows program: RBM is included for local or remote control. Since Oct/2016 a special release that supports 4 square verticals is also available.

    130,00170,00 VAT not included
    Clear
    Select options
  • Raspberry Pi 3 B+ & remoteRotator

    This is a great and low cost solution for a remote control of the rotors or when there are several local rotors and you wish to control any of them in a simple way. You will connect the ARS-USB to the Raspberry Pi (USB port) and then you can use the ARSVCOM (TCP/IP connecton) or via a simple browser to control the rotator via RemoteRotator.

    One Raspberry Pi can support as many ARS-USB as you need. 

    The same Raspberry Pi can be used for any device as:

    • ARS-USB
    • RemoteBox
    • StackMain

     

    70,0080,00 VAT not included
    Clear
    Select options
  • AS2x2

    ANTENNA SWITCH 2x2

    The antenna Switch AS2x2 is a 2 Input Ports into 2 Outputs Ports, usefull for a contest station where you have a Main Radio (RUN) and a Multiplier Station (Inband) at the same band. In this way, the RUN station uses the main antenna(s) while the Inband station is looking for new multipliers or QSOs and uses an RX antenna located far from the main antenna. As soon as the Inband station passes to TX, the switch AS2x2 inverts the antennas, passing the Inband station to use the Main antenna while the RUN does not run out of antenna put to use the antenna of RX.

    The AS2x2 can be connected between the RUN Radio and the Linear Amplifier (in case a Amplifier is used) and between the Inband Radio and the RX antenna. As soon as the Inband Radio activates the PTT the AS2x2 will exchange the outputs, so the Inband will use the Linear Amplifier and the RX antenna will be assigned into the RUN Radio.

    The AS2x2 can be used combined with the Interlock 5R so in this case, the Interlock 5R will control automatically the antenna switching.

     

     

     

    60,00 VAT not included Add to cart
  • AS1x6

    ANTENNA SWITCH 1x6

    The AS1x6 Remote Coax Switch lets you remotely switch up to 6 HF antennas so you can replace 6 coax feedlines with a single coax. Eliminate a tangle of troublesome coax and have a simple and near installation with just a single coax feedline!

    The AS1x6 will require a control unit as the RemoteBox (https://ea4tx.com/products-page/remotebox/remotebox/) or similar control units. This AS1x6 is a weatherproof switching box that mounts on your tower or mast and the control unit thats placed at your operating station.

    180,00 VAT not included Add to cart
  • AS2x6

    ANTENNA SWITCH 2x6

    We offer the best remote antenna switches with 2 radio and 6 antennas! We carry antenna switches with robust power ratings that eliminate crosstalk and interference caused by strong signals on other ports. This AS2x6 remote switches use quality components and are weatherproofed to stand up to the elements. Plus, installation is hassle-free, making the remote antenna switches an ideal addition to your amateur radio.

    The AS2x6 Remote Antenna Switch lets you remotely switch up to 6 HF antennas into 2 coax. Eliminate a tangle of troublesome coax and have a simple and near installation with just a single coax feedline!

    The AS2x6 will require a control unit as the RemoteBox 2x6 (https://ea4tx.com/products-page/remotebox/remotebox/) or similar control units. This AS2x6 is a weatherproof switching box that mounts on your tower or mast and the control unit thats placed at your operating station.

    [caption id="attachment_6694" align="aligncenter" width="885"]AS2x2-EA4TX-ISOLATION 2 Ports isolation[/caption]
    270,00 VAT not included Add to cart
  • Combi_AS1x6_RB1x6

    Includes the AS1x6 antenna switch and its RemoteBox1x6 controller

    ANTENNA SWITCH 1x6

    The AS1x6 Remote Coax Switch lets you remotely switch up to 6 HF antennas so you can replace 6 coax feedlines with a single coax. Eliminate a tangle of troublesome coax and have a simple and near installation with just a single coax feedline!

    The AS1x6 will require a control unit as the RemoteBox (https://ea4tx.com/products-page/remotebox/remotebox/) or similar control units. This AS1x6 is a weatherproof switching box that mounts on your tower or mast and the control unit thats placed at your operating station.

    REMOTEBOX 1x6

    The RemoteBox is an universal antenna switch controller so it's the perfect combination with the AS1x6

    It includes a Band Data input so connected to the Radio it can automatically select the antenna. ICOM radios that support Band Voltage output are also supported.  

    260,00 VAT not included Add to cart
  • Combi_AS2x6_RB2x6

    Includes the AS2x6 antenna switch and its RemoteBox2x6 controller

    ANTENNA SWITCH 2x6

    We offer the best remote antenna switches with 2 radio and 6 antennas! We carry antenna switches with robust power ratings that eliminate crosstalk and interference caused by strong signals on other ports. This AS2x6 remote switches use quality components and are weatherproofed to stand up to the elements. Plus, installation is hassle-free, making the remote antenna switches an ideal addition to your amateur radio.

    The AS2x6 Remote Antenna Switch lets you remotely switch up to 6 HF antennas into 2 coax. Eliminate a tangle of troublesome coax and have a simple and near installation with just a single coax feedline!

    This bundle includes the control unit: RemoteBox 2×6. 

    REMOTEBOX 2x6

    The RemoteBox is an universal antenna switch controller so it's the perfect combination with the AS2x6

    It includes 2 Band Data inputs so connected to the Radios it can automatically select the antenna. ICOM radios that support Band Voltage output are also supported.  

    365,00 VAT not included Add to cart
  • AS2x8

    ANTENNA SWITCH 2x8

    We offer the best remote antenna switches with 8 ports and 2 outputs! We carry antenna switches with robust power ratings that eliminate crosstalk and interference caused by strong signals on other ports. This AS2x8 remote switches use quality components and are weatherproofed to stand up to the elements. Plus, installation is hassle-free, making the remote antenna switches an ideal addition to your amateur radio.

    The AS2x8 Remote Antenna Switch lets you remotely switch up to 8 HF antennas into 2 coax. Eliminate a tangle of troublesome coax and have a simple and near installation with just a single coax feedline!

    The AS2x8 will require a control unit as the RemoteBox 2x8 (https://ea4tx.com/products-page/remotebox/remotebox/) or similar control units. This AS2x8 is a weatherproof switching box that mounts on your tower or mast and the control unit thats placed at your operating station.

    320,00 VAT not included Add to cart
  • StackMatch

    StackMatch is designed to Stack, Match and Power Split up to three antennas. It can be used to switch antennas in a stack or for beaming multiple directions.

    Works with any antenna design (monoband or multiband) and it can be used as a traditional antenna switch:

    • ANT-A
    • ANT-B
    • ANT-C

    or stacked combination:

    • ANT-A + ANT-B
    • ANT-A + ANT-C
    • ANT-B + ANT-C
    • ANT-A + ANT-B + ANT-C

    It provides a reasonable SWR with any port combination:

    [caption id="attachment_6693" align="aligncenter" width="886"] 2 Ports activated: AntA + AntB[/caption] [caption id="attachment_6692" align="aligncenter" width="884"]ST1X3-EA4TX-SWR1 1 Port active: AntA[/caption]

    The StackMatch will require a control unit as the StackMain (https://ea4tx.com/product/stackmain/stackmain/) or similar control units.

     

    200,00220,00 VAT not included
    Clear
    Select options
  • RemoteBox Cable

    2 cables are available as option:

    • Yaesu DIN8
    • Elecraft ACC (DB15)

    Select the cable required.

    15,00 VAT not included
    Clear
    Select options
  • Raspberry Pi 3 B+ & remoteSwitch

    This is a great and low cost solution for any Antenna Switch or StackMatch in a simple way. You will connect the RemoteBox to the Raspberry Pi (USB port) and then you can use the RBM (TCP/IP connecton) or via a simple browser to control the rotator via RemoteSwitch.

    One Raspberry Pi can support several RemoteBox, StackMain, and ARS-USB. 

    The same Raspberry Pi can be used for any device as:

    • ARS-USB
    • RemoteBox
    • StackMain

     

    70,0080,00 VAT not included
    Clear
    Select options