Tobi DH1TW has designed the remoteSwitch program with which you can control any of our RemoteBox or StackMain models:

      • RemoteBox 1×6
      • RemoteBox 2×6
      • RemoteBox 1×8
      • RemoteBox 2×8
      • RemoteBox 2×12
      • RemoteBox 1×4
      • StackMain (controlador StackMatchs 1×3)

Provided with a simple web interface, so that from any device (PC, Tablet or Mobile Phone) we can operate the antenna switch, Stacks or Phased vertical antennas, both locally and remotely over the internet. Through this web interface we can manage multiple devices simultaneously.

If we also want to connect one or more RBM client programs, then we will also use the ser2net  service. The current version (V4) of the service ser2net allows several TCP/IP clients to access the device simultaneously.

The remoteSwitch program is available in source code in the Tobi DH1TW Github repository.


This picture shows the diagram of the complete solution. It consists of at least 4 services and they are:

  • remoteSwitch Web Server: module of the remoteSwitch that provides the web interface. It communicates with the rest of the remoteSwitch modules through the Nats server
  • remoteSwitch: module that supports each RemoteBox or StackMain device. One is used for each device, in this example only one.
  • Nats Server: The Nats is a simple, secure and high-performance messaging system that is used for the different remoteSwitch modules to communicate with each other.
  • Ser2Net: module that converts the serial connections of each device (RemoteBox or StackMain) into TCP/IP and multi-concurrent. The remoteSwich module agrees to communicate with each RemoteBox/StackMain via TCP/IP through this module.

The ideal platform to manage the RemoteBox and StackMain is undoubtedly the Raspberry Pi (or similar device as Rock), due to its reliability, low consumption – with which we take care to leave it on 24 hours – and at its interesting price.

In this tutorial we will explain step by step the start-up of the remoteSwitch as well as the ser2net  and nats service using an RsPi (it does not matter the RsPi model, Rock or similar SBC).

In 4 simple steps, we will implement this solution, it will not be necessary to have great computer knowledge although you can always request a Raspberry with everything already installed in our store.

1.- Installation of the Operating System in the microSD

In a first step, we will explain how from scratch, we will finally have our RsPi running the Raspbian (V11 bullseye) operating system for the first time.

For this we will need the computer to have a microSD card reader and a 16Gb SD Card.

If you already have an RsPi with the operating system running, you can skip this step.

2.- Preparing the Raspberry Pi

In this second step, we will change parameters that come by default from the Raspbian distribution, customizing certain features (language, SSH, …)

We will explain how to change the IP that by default is assigned by DHCP to a static IP and that will be necessary to be able to access the equipment at any time.

We will also add some utility, to make life easier for us in the Linux world, especially when we are not regular users of this S.O.

3.- Installation and adjustment of Nats and Ser2net

Here we explain how to install the nats and ser2net server. The configuration of the ser2net module is explained and where it is located.

The Nats does not require configuration parameters.

4.- Installation and adjustment of the remoteSwitch

Finally we explain how to install the remoteSwitch program, how it is configured and the options.

  • Remember that at least you will have 2 instances running:
    • One running as a web server
    • As many additional instances as RemoteBox and StackMain devices have to be supported

Once you have followed these 4 steps, you will have been able to connect locally with a browser to the Raspberry Pi and control the RemoteBox and / or StackMain that you have defined.

Besides using the RBM program, you will also have been able to connect. If the access is going to be remote, that is to say that you want to access a Remote point where you have a RemoteBox + RsPi, then you will have to open ports of the remote router so that when accessing your IP (public area IP or WAN) the router route traffic to the IP of the Raspberry Pi.

If you want to limit web access to prevent unauthorized access, you can use Caddy ( Caddy is a web server that mounted in front of the remoteSwitch web service, allows user authentication and allows access to the engine control. You have a Tobi tutorial explaining the launch of the Caddy program at:

We will be closed for holidays from 10/July to 28/July.


Cerramos por vacaciones desde el 10/Julio al 28/Julio

This will close in 5 seconds