See comments in eham.net
New Products
-
ARS-USB_YAESU
185,00€ VAT not included Add to cartThis is a special version based on the ARS-USB that was re-designed to be used as a rotor controller or replacement for a Yaesu Control Unit (or similar rotators) that operates 24Vdc
It includes the same features as the standard ARS-USB adding some extra as:
- Simple and easy calibration at any rotor position in few steps.
- Soft start and stop via a PWM. It allows to have a soft starting/stopping ramp.
- It detects if the potentiometer is out of range and will prevent any accidental problem with the antenna coax. Any problem with the potentiometer or cables are detected inmediately
- If the motor is jammed by any reason, an alarm will be displayed and the appointment will stop. The user will be noticed.
All those watch-dog systems (and some more options) will prevent to generate a problem if the potentiometer is damaged by any cause (any wire broken, moisture, a wrong cable connection, etc).
This model include a 24Vdc power supply.
-
VA6AM 10-15-20m Triplexer
235,00€ Add to cartLow power Triplexer (200w) designed by VA6AM for the 10m, 15m and 20m bands.
It allows to obtain from a TriBand antenna, its 3 independent outputs.
The equipment is delivered complete and adjusted.
-
ARS-USB Rotor
140,00€ – 200,00€ VAT not included Select optionsThe ARS-USB (Antenna Rotator System) is the easiest and highest performance Universal Interface for handling your Antenna Rotor. You’ll be able to control your Antenna Rotor from your computer. Connecting the ARS-USB to your PC via a USB Port and later to your Rotator is easy. Within a few minutes, you will be able to point your antennas from your computer automatically.
There are 2 models available:
- Azimuth (1 motor)
- Azimuth & Elevation (2 motors)
So order the model according to your preferences.
We have optionally the cable for some rotator models (Yaesu and Emotator)
-
Raspberry Pi 3 B+
70,00€ – 80,00€ VAT not included Select optionsThis is a great and low cost solution for a remote control of the rotors or when there are several local rotors and you wish to control any of them in a simple way. You will connect the ARS-USB to the Raspberry Pi (USB port) and then you can use the ARSVCOM (TCP/IP connecton) or via a simple browser to control the rotator via RemoteRotator.
One Raspberry Pi can support as many ARS-USB as you need.
The same Raspberry Pi can be used for any device as:
- ARS-USB
- RemoteBox
- StackMain
Top Sellers
-
RemoteBox
130,00€ – 170,00€ VAT not included Select optionsUniversal Antenna controller that can be connected with most antenna switchs for remote or automatic control. Example of Antenna Switchs supported:
- SixPack (2×6)
- SJ2W (1×6 and 2×6)
- microHAM (Six Switch, Switch Double Six, ..)
- RemoteQTH (1x6, 2x6),
- DX Engineering (DXE-RR8B-HP, DXE-RR8B-SD, DXE-RR2X8B )
- Ameritron RCS-10
In this way, the RemoteBox can control those antenna switchs by replacing the original controller. Also a windows program: RBM is included for local or remote control. Since Oct/2016 a special release that supports 4 square verticals is also available.
-
ARS-USB Rotor
140,00€ – 200,00€ VAT not included Select optionsThe ARS-USB (Antenna Rotator System) is the easiest and highest performance Universal Interface for handling your Antenna Rotor. You’ll be able to control your Antenna Rotor from your computer. Connecting the ARS-USB to your PC via a USB Port and later to your Rotator is easy. Within a few minutes, you will be able to point your antennas from your computer automatically.
There are 2 models available:
- Azimuth (1 motor)
- Azimuth & Elevation (2 motors)
So order the model according to your preferences.
We have optionally the cable for some rotator models (Yaesu and Emotator)
-
Cable ARS-USB
15,00€ VAT not included Select optionsOptional cables for use with Yaesu controllers
Yaesu MiniDIN: Yaesu controllers DXA, SDA Series with minIDIN connector
Yaesu DIN8: Yaesu Azimuth & Elevation controllers with DIN 8 connector
Emotator DIN8: Emotator Azimuth & Elevation controllers with DIN 8 connector
-
ARS-Shield PCB
20,00€ – 95,00€ VAT not included Select optionsThe ARS-Shield is a board that can be plugged on a Arduino adding the capability to interface with a rotor. It’s compatible with K3NG rotator controller.
The ARS-Shield PCB doesn't include components neither the Arduino module.
As an option you have also available an enclosure with LCD and 4 keys buttons:
www.ea4tx.com/products-page/ars-shield/ars-shield-pcb-enclosure-lcd-4-buttons-2/
News
IberRadio 2019
This year will be again presents at IberRadio during next 14/15 of September – 2019 Following the success of previous editions, we come back with
SDR Console support
Since ARSVCOM V6.9.1 the SDR Console program is supported. SDR Console is a great program that includes a module for satellite tracking. You can read
VA6AM distribution
An agreement has been reached with Pavel VA6AM, famous for its high and low power triplexers for distribution in Europe.
Black Friday
From 22 to 25 November you can get a special 20% discount in most our products. Use the Coupon Code: BLACK18 You can enter this
IberRadio 2018
This year will be again presents at IberRadio during next 15/16 of September. Following the success of previous editions, we come back with more news
