NEW

ARS-CU_YAESU_AE

340,00 VAT not included

This is a special version based on the ARS-USB that was re-designed to be used as a rotor controller or replacement for a 2-axis Control Unit (for instance the G5500DC) that operates 24Vdc

The ARS-CU_Yaesu_DC is a direct replacement control box for the Yaesu G-5500DC

A version for motors of 12Vdc or different Voltage can be adapted by request.

5 in stock

SKU: ARS-CU_YAESU_AE Category: Tags: , , ,

Description

The ARS-CU_YAESU_AE is a special version based on the ARS-USB that can be used as a replacement or controller for any 2-axis rotors (Azimuth & Elevation) that operates 24Vdc as it’s the Yaesu G-5500DC

Also it can be used with any motors (Azimuth & Elevation) that works in DC (12 or 24Vdc)

In this case, the motor will be connected directly into this unit. It includes 2 control connectors of 5 wires, one for Azimuth and one for Elevation).

The ARS-CU_YAESU_AE  can be connected to the computer via USB and it’s detected as a serial port, so any program will be able to control it via this serial port. Moreover it emulates a Yaesu GS232A interface; this fact has the advantage that any program that supports a GS232A will support directly the ARS-CU_YAESU_AE.

A program to guide during the setup and calibration is included: ARSVCOM (ARSConf).The calibration of a unit is very simple and includes a step by step guide. Also it allows controlling the rotor with a graphical and friendly user interface. It’s a nice option when you want to control the antenna local or remotely via Internet.

A tool for upgrade the firmware of the ARS-USB is included: Teleloader. With this software, you will upload new releases of the ARS-Yaesu_AE firmware.

All the software can be downloaded from this link:

CD-ROMs are no longer sent, if you physically need the CD-ROM, contact EA4TX

Additional information

Weight 1500 g
Dimensions 22 × 22 × 10 cm