Interlock – AuxBox
50,00€ – 55,00€ VAT not included
Optional Interconection box for transceivers without Inhibit signal
Description
The AuxBox is an optional universal box for the Interlock. It can be ordered for those transceivers that don’t include a Inhibit signal as most Kenwood or ICOM equipments.
In this way, the Aux Box is connected between the mic connector and CW Key and the transceiver. So it can control the Mic, PTT and CW signals and when the Interlock activates the Inhibit, those signals are open, so the transceiver will not transmit.
Additional information
| Weight | 200 g |
|---|---|
| Dimensions | 15 × 15 × 1 cm |
| english-aux-box | Aux Box ICOM 2m, Aux Box ICOM 5m, Aux Box Kenwood 2m, Aux Box Kenwood 5m |
Related products
-
RX-FEL
[:es]45,00€ VAT not included Select optionsEl RX-FEL es un protector de RF para el receptor o SDR. Instalado entre la antena de recepción (p.e. beverage) y el receptor, va a limitar que ninguna señal de radiofrecuencia pueda dañarlo.
Este protector es ideal en entornos de concurso Multi-Estación con otra estación transmitiendo en las cercanías o incluso en SO2R.
- Pérdidas por inserción mejor a 0,4dB en HF (1.8-30Mhz)
- ROE mejor a 1,06:1
[:en]The RX-FEL is a RF protector and limiter for your radio receiver or SDR. Installed between the RX antenna and the receiver, it will limited any RF signal and will avoid to damage the receiver because strong signals.
The RX-FEL is a device that will protect the receiver front end from high level signals when operating in the proximity to other transmitters which could damage it. Situations such as multi op contesting, SO2R or Field Day.
- Insertion lost better than 0.4dB in HF (1.8Mhz - 50Mhz)
- VSWR < 1.06:1 (reception)
-
Interlock – cable
[:es]25,00€ VAT not included Select optionsCables para Interlocks para usarse con Yaesu o K3.
[:en]Optional Interlock cables to be used with Yaesu or K3 (3m)
[:] -
6xBFP-FEL
[:es]25,00€ Add to cartEl 6xBPF-FEL es una placa PCB donde puedes montar los componentes para construirte un conmutador de antenas de recepción (x6), un filtro pasabanda de 10 a 160m y un limitador para proteger el receptor.
Lo diseñamos conjuntamente con Imanol EC2DX, Jose Ramon EA7KW y Juanma EA5RS y desde 2017 lo estamos usando en nuestras estaciones.
[:en]The FEL is a PCB board where you can assemble the components to build a 6x receiver antenna switch, 6x bandpass filters from 10 to 160m and a limiter to protect the receiver.
It was designed by Imanol EC2DX, Jose Ramon EA7KW, Juanma EA5RS & Pablo EA4TX and since 2017 we are using this 6xBPF-FEL at our contest stations.
[:]