All Products
-
StackMatch
[:es]200,00€ – 220,00€ VAT not included Select optionsEl StackMatch está diseñado para poder Enfasar varias antenas, Ajustar y Divisor de Potencia de hasta tres antenas. Se puede usar como conmutador de 3 antenas en un stack o en diferentes direcciones. Funciona con cualquier diseño de antena bien mono-banda o multi-banda y se puede emplear como un conmutador remote de:
- ANT-A
- ANT-B
- ANT-C
O cualquier combinación de enfasamiento:
- ANT-A + ANT-B
- ANT-A + ANT-C
- ANT-B + ANT-C
- ANT-A + ANT-B + ANT-C
proporcionando una ROE razonable. El StackMatch necesita de un controlador para facilitar la operación y combinación de las antenas como puede ser el StackMain (https://ea4tx.com/product/stackmain/stackmain/) o unidades similares.
[:en]StackMatch is designed to Stack, Match and Power Split up to three antennas. It can be used to switch antennas in a stack or for beaming multiple directions.
Works with any antenna design (monoband or multiband) and it can be used as a traditional antenna switch:
- ANT-A
- ANT-B
- ANT-C
or stacked combination:
- ANT-A + ANT-B
- ANT-A + ANT-C
- ANT-B + ANT-C
- ANT-A + ANT-B + ANT-C
It provides a reasonable SWR with any port combination:
[caption id="attachment_6693" align="aligncenter" width="886"]
2 Ports activated: AntA + AntB[/caption] [caption id="attachment_6692" align="aligncenter" width="884"]
1 Port active: AntA[/caption]
The StackMatch will require a control unit as the StackMain (https://ea4tx.com/product/stackmain/stackmain/) or similar control units.
[:] -
VA6AM 10-15-20m Triplexer
[:es]235,00€ Add to cartTriplexor de baja potencia (200w) diseñado por VA6AM para las bandas de 10m, 15m y 20m.
Permite obtener de una antena con las bandas de 10-15-20, sus 3 salidas independientes.
El equipo se entrega completo y ajustado.
[:en]Low power Triplexer (200w) designed by VA6AM for the 10m, 15m and 20m bands.
It allows to obtain from a TriBand antenna, its 3 independent outputs.
The equipment is delivered complete and adjusted.
[:] -
160m High power BPF – 4Kw
[:es]230,00€ VAT not included Select optionsFiltro paso banda de alta potencia (4Kw) para 160m.
Se instala a la salida del amplificador eliminando cualquier problema de interferencias entre bandas y armónicos
Filtro construido a mano, calidad excelente pero sobre todo fiable y robusto.
[:en]This is a High power (4Kw) 160m Band Pass Filter for Big Guns.
Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.
All BPF's are hand made
[:] -
80m High power BPF – 4Kw
[:es]230,00€ VAT not included Select optionsFiltro paso banda de alta potencia (4Kw) para 80m.
Se instala a la salida del amplificador eliminando cualquier problema de interferencias entre bandas y armónicos
Filtro construido a mano, calidad excelente pero sobre todo fiable y robusto.
[:en]This is a High power (4Kw) 80m Band Pass Filter for Big Guns.
Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.
All BPF's are hand made
[:] -
40m High power BPF – 4Kw
[:es]230,00€ VAT not included Select optionsFiltro paso banda de alta potencia (4Kw) para 40m.
Se instala a la salida del amplificador eliminando cualquier problema de interferencias entre bandas y armónicos
Filtro construido a mano, calidad excelente pero sobre todo fiable y robusto.
[:en]This is a High power (4Kw) 40m Band Pass Filter for Big Guns.
Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.
All BPF's are hand made
[:] -
10m High power BPF – 4Kw
[:es]230,00€ VAT not included Select optionsFiltro paso banda de alta potencia (4Kw) para 10m.
Se instala a la salida del amplificador eliminando cualquier problema de interferencias entre bandas y armónicos
Filtro construido a mano, calidad excelente pero sobre todo fiable y robusto.
[:en]This is a High power (4Kw) 10m Band Pass Filter for Big Guns.
Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.
All BPF's are hand made
[:] -
20m High power BPF – 4Kw
[:es]230,00€ VAT not included Select optionsFiltro paso banda de alta potencia (4Kw) para 20m.
Se instala a la salida del amplificador eliminando cualquier problema de interferencias entre bandas y armónicos
Filtro construido a mano, calidad excelente pero sobre todo fiable y robusto.
[:en]This is a High power (4Kw) 20m Band Pass Filter for Big Guns.
Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.
All BPF's are hand made
[:] -
15m High power BPF – 4Kw
[:es]230,00€ VAT not included Select optionsFiltro paso banda de alta potencia (4Kw) para 15m.
Se instala a la salida del amplificador eliminando cualquier problema de interferencias entre bandas y armónicos
Filtro construido a mano, calidad excelente pero sobre todo fiable y robusto.
[:en]This is a High power (4Kw) 15m Band Pass Filter for Big Guns.
Once, you have band pass filter after linear amplifier, well designed and reliable, you will forget about all the problems with interferences between the bands and strong harmonics.
All BPF's are hand made
[:] -
6xBFP-FEL
[:es]25,00€ Add to cartEl 6xBPF-FEL es una placa PCB donde puedes montar los componentes para construirte un conmutador de antenas de recepción (x6), un filtro pasabanda de 10 a 160m y un limitador para proteger el receptor.
Lo diseñamos conjuntamente con Imanol EC2DX, Jose Ramon EA7KW y Juanma EA5RS y desde 2017 lo estamos usando en nuestras estaciones.
[:en]The FEL is a PCB board where you can assemble the components to build a 6x receiver antenna switch, 6x bandpass filters from 10 to 160m and a limiter to protect the receiver.
It was designed by Imanol EC2DX, Jose Ramon EA7KW, Juanma EA5RS & Pablo EA4TX and since 2017 we are using this 6xBPF-FEL at out contest stations.
[:]
