80,00€ – 95,00€ VAT not included
This is a great and low cost solution for any Antenna Switch or StackMatch in a simple way. You will connect the RemoteBox to the Raspberry Pi (USB port) and then you can use the RBM (TCP/IP connecton) or via a simple browser to control the rotator via RemoteSwitch.
One Raspberry Pi can support several RemoteBox, StackMain, and ARS-USB.
The same Raspberry Pi can be used for any device as:
A Raspberry Pi (RsPi) ready to be used with a RemoteBox for a full control of a Antenna Switch or Stack Match. It will allow a TCP/IP control of the RemoteBox/StackMain in local (LAN) or remote (Internet)
It includes:
| Weight | 400 g |
|---|---|
| Dimensions | 15 × 15 × 7 cm |
| rspi | RsPi, RsPi + Power Supply |
CONMUTADOR ANTENA 1x8
Excelente conmutador de 8 antenas remoto! El conmutador de antenas remoto AS1x8 emplea componentes de calidad y su caja de aluminio está preparada para ser empleada en el exterior. El conmutador de antenas AS1x8 permite conmutar hasta 8 antenas con lo que puedes reemplazar 8 coaxiales por uno. El AS1x8 necesita un mando de control por ejemplo el remoteBox 1x8 (https://ea4tx.com/products-page/remotebox/remotebox/) o mandos similares. El AS1x8 es estanco y puede ser instalado en el exterior como en la torre o mastil.
[:en]ANTENNA SWITCH 1x8
The AS1x8 Remote Coax Switch lets you remotely switch up to 8 HF antennas so you can replace 8 coax feedlines with a single coax. Eliminate a tangle of troublesome coax and have a simple and near installation with just a single coax feedline!
The AS1x8 will require a control unit as the RemoteBox (https://ea4tx.com/products-page/remotebox/remotebox/) or similar control units. This AS1x8 is a weatherproof switching box that mounts on your tower or mast and the control unit thats placed at your operating station.
[:]El RemoteBox es un mando universal de control de conmutadores de antenas y compatible con la mayoría del mercado.
Algunos ejemplos son:
De esta forma el RemoteBox puede manejar directamente el conmutador de antena original manual, automáticamente por la radio (Band data) o por medio del programa RBM (local o remotamente)
También se hay una versión especial de controlador para enfasar 4 verticales.
[:en]
Universal Antenna controller that can be connected with most antenna switchs for remote or automatic control. Example of Antenna Switchs supported:
In this way, the RemoteBox can control those antenna switchs by replacing the original controller. Also a windows program: RBM is included for local or remote control. Since Oct/2016 a special release that supports 4 square verticals is also available.
[:]
CONMUTADOR ANTENA 1x6
Excelente conmutador de 6 antenas remoto! El conmutador de antenas remoto AS1x6 emplea componentes de calidad y su caja de aluminio está preparada para ser empleada en el exterior. El conmutador de antenas AS1x6 permite conmutar hasta 6 antenas con lo que puedes reemplazar 6 coaxiales por uno. El AS1x6 necesita un mando de control por ejemplo el remoteBox 1x6 (https://ea4tx.com/products-page/remotebox/remotebox/) o mandos similares. El AS1x6 es estanco y puede ser instalado en el exterior como en la torre o mastil.
[:en]ANTENNA SWITCH 1x6
The AS1x6 Remote Coax Switch lets you remotely switch up to 6 HF antennas so you can replace 6 coax feedlines with a single coax. Eliminate a tangle of troublesome coax and have a simple and near installation with just a single coax feedline!
The AS1x6 will require a control unit as the RemoteBox (https://ea4tx.com/products-page/remotebox/remotebox/) or similar control units. This AS1x6 is a weatherproof switching box that mounts on your tower or mast and the control unit thats placed at your operating station.
[:]